Sides section according to merchant rolled shape
Width from 30 to 120 mm
Thickness from 3 to 13 mm
— It is possible to produce any intermediate sections.
— Production of flat bars from 4 to 6,5 meters with permissible variation of -0 +200 mm (CLOSE: 0/+50 mm).
— Production of bars of length. up to 6570 mm (exceptionally 6720 mm without stop).
Commercial quality
S235 JR | EN 10025 | EN 10058 |
S275 JR | EN 10025 | EN 10058 |
S355 JR/J0/J2 | EN 10025 | EN 10058 |
— The material is delivered unrolled.
— Termical treatment are not provide.
Cutting Appearance
Cold shearing with flat knives; square cut ends.
General structural steel | ⇒ | EN 10025 |
Heat treatable Carbon steel | ||
Heat treatable Boron steel | ||
Heat treatable Mn-Si, Mn-Si-Cr steel |
Thickness | (mm) | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Width | 30 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |||
Width | 35 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |||
Width | 40 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |
Width | 45 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |
Width | 50 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ |
Width | 55 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |
Width | 60 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |
Width | 65 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |
Width | 70 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |
Width | 75 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |||
Width | 80 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |||
Width | 85 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |||
Width | 90 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |||
Width | 95 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |||
Width | 100 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |||
Width | 110 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | |||||
Width | 120 | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ | ⦿ |
Thickness | (mm) | 3 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | 13 |
---|---|---|---|---|---|---|---|---|---|---|
Width | 30 | 0.71 | 0.94 | 1.18 | 1.41 | 1.65 | 1.88 | 2.36 | ||
Width | 35 | 0.82 | 1.10 | 1.37 | 1.65 | 1.92 | 2.20 | 2.75 | ||
Width | 40 | 0.94 | 1.26 | 1.57 | 1.88 | 2.20 | 2.51 | 3.14 | 3.77 | |
Width | 45 | 1.06 | 1.41 | 1.77 | 2.12 | 2.47 | 2.83 | 3.53 | 4.24 | |
Width | 50 | 1.18 | 1.57 | 1.96 | 2.36 | 2.75 | 3.14 | 3.93 | 4.71 | 5.10 |
Width | 55 | 1.30 | 1.73 | 2.16 | 2.59 | 3.02 | 3.45 | 4.32 | 5.18 | |
Width | 60 | 1.41 | 1.88 | 2.36 | 2.83 | 3.30 | 3.77 | 4.71 | 5.65 | |
Width | 65 | 1.53 | 2.04 | 2.55 | 3.06 | 3.57 | 4.08 | 5.10 | 6.12 | |
Width | 70 | 1.65 | 2.20 | 2.75 | 3.30 | 3.85 | 4.40 | 5.50 | 6.59 | |
Width | 75 | 1.77 | 2.36 | 2.94 | 3.53 | 4.12 | 4.71 | 5.89 | ||
Width | 80 | 1.88 | 2.51 | 3.14 | 3.77 | 4.40 | 5.02 | 6.28 | ||
Width | 85 | 2.00 | 2.67 | 3.34 | 4.00 | 4.67 | 5.34 | 6.67 | ||
Width | 90 | 2.12 | 2.83 | 3.53 | 4.24 | 4.95 | 5.65 | 7.07 | ||
Width | 95 | 2.24 | 2.98 | 3.73 | 4.47 | 5.22 | 5.97 | |||
Width | 100 | 2.36 | 3.14 | 3.93 | 4.71 | 5.50 | 6.28 | |||
Width | 110 | 2.59 | 3.45 | 4.32 | 5.18 | 6.045 | 6.91 | |||
Width | 120 | 2.83 | 3.77 | 4.71 | 5.65 |
Width* | Thickness** 3÷12 mm | Lenght (Min 4 m, Max 6,5 m) |
EN 10058 | ||||
---|---|---|---|---|---|---|---|
Nominal value | Tolerances ∓ | for width of | Thickness Tolerances | Current | Restricted | Straightness Sect. Nominal (mm2) | |
30 | ∓0.75 | 30 | ∓0,50 | 0÷200 | 0÷50 | <1000-0,004xL. | |
35 | ∓0.75 | 35 | ∓0,50 | 0÷200 | 0÷50 | ||
40 | ∓0.75 | 40 | ∓0,50 | 0÷200 | 0÷50 | ||
45 | ∓1.00 | 45 | ∓0,50 | 0÷200 | 0÷50 | ||
50 | ∓1.00 | 50 | ∓0,50 | 0÷200 | 0÷50 | ||
55 | ∓1.00 | 55 | ∓0,50 | 0÷200 | 0÷50 | ||
60 | ∓1.00 | 60 | ∓0,50 | 0÷200 | 0÷50 | ||
65 | ∓1.00 | 65 | ∓0,50 | 0÷200 | 0÷50 | ||
70 | ∓1.00 | 70 | ∓0,50 | 0÷200 | 0÷50 | <1000-0,0025xL. | |
75 | ∓1.00 | 75 | ∓0,50 | 0÷200 | 0÷50 | ||
80 | ∓1.00 | 80 | ∓0,50 | 0÷200 | 0÷50 | ||
85 | ∓1.50 | 85 | ∓0,50 | 0÷200 | 0÷50 | ||
90 | ∓1.50 | 90 | ∓0,50 | 0÷200 | 0÷50 | ||
95 | ∓1.50 | 95 | ∓0,50 | 0÷200 | 0÷50 | ||
100 | ∓1.50 | 100 | ∓0,50 | 0÷200 | 0÷50 | ||
110 | ∓2.00 | 110 | ∓0,50 | 0÷200 | 0÷50 | ||
120 | ∓2.00 | 120 | ∓0,50 | 0÷200 | 0÷50 |
* WIDTH ∓0,50 ON DEMAND
**THICKNESS ∓0,15 ON DEMAND